Hydraulic Wire Rope cutter
- : WORKING : -
The
wire rope/Cable cutter consists of a hydraulic plunger pump which when actuated
by the handle, releases valve being in close condition,pumps oil in the
cylinder,forcing the ram out.The ram has a cutting blade attached to it and this
pierces the wire rope or cable held against a pair of U shaped blades housed in
U blade holder,which is hinged to the cutter body at the bottom and the upper
link (latch) at the top.This arrangement enables the cutter to be employed at
any point of an endless wire rope or cable.
The releas valve provided at the top enables the self retracting ram to
return to its position.The air valve ensures smooth working of the ram.
- : ADVANTAGES :-
1.Steel
construction with case hardened pins.
2.Hardened & ground tool steel cutting blades and U blades.
3.Compact and light weight.
4.Portable and convenient to employ in places with restricted floor
space.
5.Ease of operation and handling.
6.Interchangeability of parts facilitates replacement.
| MODEL |
CUTTING
DIA. |
DIMENSION
IN MM |
NET WEIGHT IN KG. |
PACKING
CASE |
GROSS
WT IN KG |
| - |
- |
L x B x H |
- |
L x B x H |
- |
| HC - 1 |
32 MM |
425 125 210 |
22 KGS. |
500 160 280 |
26 KGS. |
| HC - 2 |
50 MM |
520 150 230 |
36 KGS. |
580 200 300 |
42 KGS. |
ELECTRIC MOTOR TYPE
Our latest development is of
wire rope / cable cutter is with electric motor which has a capacity of cutting
up to 100 mm diameter.
Specification on request.
Due to continuous improvement
in design ,above specifications are subject to alterations.
For more tools in tools category,
please use our inquiryform.
HOME