Kumaun Magnetic Tools
Magnetic V Blocks
Magnetic Vee bocks are invaluable and versatile in tool - making and inspection, in quality control and tool - room. Due to their high magnetic power they can be used for drilling and grinding ( both wet and dry ) and even for light milling work. The Blocks have a total of three magnetic surfaces. Top and bottom each with 90 degree V - angle and end surface opposite from switch. All three magnetic surfaces as well as the two sides are carefully ground. Their accuracy for flatness, parallelism and square ness is within 0.005 mm or 0.0002 inches for all work which requires accurate positioning. When turned 'ON' all three magnetic surfaces are activated simultaneously. The permanent magnet holds the work firmly in the V and the block holds itself firmly on a ferrous surface. The magnetic system, being shielded from penetration of moisture cannot be damaged by coolants or fluids.
WE ALSO MANUFACTURE V - BLOCKS IN 120 DEGREE ANGLE AS PER DEMAND. V - BLOCKS OF 60 DEGREE ANGLE IS IN DEVELOPING STAGE AND WILL LAUNCHED SOON.
|
CAT
NO.
|
SIZE
|
CLAMPING
CAPACITY
|
MAGNETIC
EFFICIENCY
|
PRICE PER PAIR |
|
MRM - 475
|
55 * 50 * 60
mm
|
5 - 35 mm
|
50 kg
|
2505 |
|
MRM - 475 H
|
55 * 50 * 60
mm
|
5 - 35 mm
|
50 kg
|
3435 |
|
MRM - 576
|
75 * 65 * 85
mm
|
5 - 55 mm
|
75 kg
|
5225 |
|
MRM - 576 H
|
75 * 65 * 85
mm
|
5 - 55 mm
|
75 kg
|
6160 |
|
MRM - 676
|
100 * 75 *
95 mm
|
5 - 65 mm
|
150 kg
|
7870 |
|
MRM - 676 H
|
100 * 75 *
95 mm
|
5 - 65 mm
|
150 kg
|
10025 |
|
MRM - 856
|
150 * 85 *
100 mm
|
8 - 80 mm
|
250 kg
|
16040 |
|
MRM - 856 H
|
150 * 85 *
100 mm
|
8 - 80 mm
|
250 kg
|
17845 |
|
MRM - 876
|
150 * 125 *
125 mm
|
10 - 120 mm
|
350 kg
|
25060 |
|
MRM - 876 H
|
150 * 125 *
125 mm
|
10 - 120 mm
|
350 kg
|
27210 |
|
MRM - 976
|
200 * 150 *
150 mm
|
10 - 150 mm
|
450 kg
|
27210 |
|
MRM - 976 H
|
200 * 150 *
150 mm
|
10 - 150 mm
|
450 kg
|
31505 |
V - Block Hardened with Clamps
The V - Blocks have two V - angles of different size to take parts of varying dimensions. By means of the clamp the work can be held tight in the block. The accuracy of the vee block / 100 mm is within 0.005 mm.
V - BLOCKS CAN BE SUPPLIED WITH 120 DEGREE ANGLE.
|
CAT NO.
|
L * W * H
|
CLAMPING RANGE
|
PRICE PER PAIR |
|
SH - 444
|
50 * 40 * 40 mm
|
5 - 30 mm
|
1605 |
|
SH - 445
|
75 * 60 * 60 mm
|
6 - 50 mm
|
2505 |
|
SH - 446
|
100 * 80 * 80 mm
|
6 - 70 mm
|
5470 |
|
SH - 447
|
70 * 140 * 140 mm
|
10 - 125 mm
|
3435 |
|
SH - 448
|
150 * 200 * 200 mm
|
10 - 150 mm
|
9740 |
|
SH - 450
|
200 * 200 * 200 mm
|
10 - 200 mm
|
21480 |
Magnetic V Blocks Special For Boring Bars
These Boring tool devices are used to set boring tool to the exact diameter on boring machines and machine tools with rotation boring tools. Because of their magnetic base, they can be held directly on boring spindle. The clamps can fit at any desired position whereby any particular bore size can be set on the device. These devices have ON / OFF switches, as per requirements and aid in holding the job on boring spindle. The 'V' slot is ground to 5 micron accuracy.
|
CAT. NO.
( with ON / OFF switch ) |
SIZE ( L W H )
|
CLAMPING RANGE
DIA. IN MM. |
PRICE |
|
KM - BSD - 201
|
70 * 22 * 40 mm
|
10 TO 60
|
1705 |
|
KM - BSD - 202
( without ON/ OFF switch ) |
75 * 22 50 mm
|
10 TO 85
|
1960 |
|
KM - BSD - 203
|
50 * 28 * 60 mm
|
10 TO 50
|
2320 |
|
KM - BSD - 204
|
60 * 30 * 60 mm
|
10 TO 60
|
2505 |
|
KM - BSD - 205
|
65 * 35 * 60 mm
|
10 TO 70
|
2865 |
|
KM - BSD - 206
|
75 * 35 * 70 mm
|
10 TO 90
|
3010 |
|
KM - BSD - 207
|
70 * 40 * 60 mm
|
15 TO 105
|
3220 |