Kumaun Magnetic Tools
Magnetic Chucks.
This permanent Magnetic Chuck guarantees
outstanding performance and reliability. The rigid assembly of these chucks
result in accrete grinding or milling. The carefully selected pole spacing
ensures the maximum possible grip on a wide section of work pieces. All types,
sizes and shapes of work pieces can be accommodated by using an additional top
plate. The magnet used is
"NdFeB". This magnet is very powerful than "AINiCo". Under
ideal conditions the test result show s that the holding power / sq. inch is 55
kg. Which much higher than "AINiCo" magnetic chuck.
|
CAT NO.
|
SIZES IN INCHES
|
SIZES IN MM
|
MAGNETIC POLE GAP ( MM )
|
Price |
| L W H | 19 | |||
| SI - NEO - 1460 - S.P. | 14" x 6" | 356 x150 x64 | 19 | |
| SI - NEO - 1860 - S.P. | 18" x 6" | 457 x150 x64 | 19 | |
| SI - NEO - 1880 - S.P. | 18" x 8" | 457 x 200 x 64 | 19 | |
| SI - NEO - 2080 - S.P. | 20" x 8" | 500 x 200 x 64 | 19 | |
| SI - NEO - 2480- S.P. | 24" x 8" | 600 x 200 x 70 | 19 | |
| SI - NEO - 2410 - S.P. | 24" x 10" | 600 x 250 x 70 | 19 | |
| SI - NEO - 2412 - S.P. | 24" x 12" | 600 x 300 x 70 | 19 | |
| SI - NEO - 3010- S.P. | 30" x 10" | 750 x 250 x 70 | 19 |
SPECIAL SIZES AVAILABLE ON REQUEST.
Magnetic Vice
The
"KUMAUN" Magnetic Vice ensures a distortion free use. This Vice
assures the square holding of the component and thus the set up time is
minimized.
SPECIAL FEATURES
1) Flatness, Squareness, & Parallelism - 0.005 mm
2) Permanent powerful magnet with ON - OFF switch
3) All surface are precision ground
4) Vertical V in movable jaw.
| CAT. NO. | SIZE | PRICE |
| KM - 730 | 150 * 115 * 75 mm | 6590 |
| KM - 739 | 180 * 120 80 mm | 8020 |
Please refer our discounts and terms pages for commercial details.